Great things from small things

U of Maryland & DOE: Precision Nano-Batteries by the Billions

U of Maryland & DOE: Precision Nano-Batteries by the Billions

U of Maryland & DOE: Precision Nano-Batteries by the Billions

DOE NAnobatts 061915 150521120952_1_540x360 Extremely small batteries built inside nanopores show that properly scaled structures can use the full theoretical capacity of the charge storage material. The batteries are part of assessing the basics of ion and electron transport in nanostructures for energy storage. These nanobatteries delivered their stored energy efficiently at high power (fast charge and discharge) and for extended cycling.

Precise structures can be constructed to assess the fundamentals of ion and electron transport in nanostructures for energy storage and to test the limits of three-dimensional nanobattery technologies.

Nanostructured batteries, when properly designed and built, offer promise for delivering their energy at much higher power and longer life than conventional technology. To retain high energy density, nanostructures (such as nanowires) must be arranged as dense “nanostructure forests,” producing three-dimensional nanogeometries in which ions and electrons can rapidly move. Researchers have built arrays of nanobatteries inside billions of ordered, identical nanopores in an alumina template to determine how well ions and electrons can do their job in such ultrasmall environments.

DOE NAnobatts 061915 150521120952_1_540x360

Complete nanobatteries are formed in each nanopore of a dense nanopore array (2 billion per square centimeter), using atomic layer deposition to carefully control thickness and length of multilayer concentric nanotubes, which serve as electrodes at each end.
Credit: Image courtesy of Gary Rubloff, University of Maryland


The nanobatteries were fabricated by atomic layer deposition to make oxide nanotubes for ion storage inside metal nanotubes for electron transport, all inside each end of the nanopores. The tiny nanobatteries work extremely well: they can transfer half their energy in just a 30 second charge or discharge time, and they lose only a few percent of their energy storage capacity after 1000 cycles. Researchers attribute this performance to rational design and well-controlled fabrication of nanotubular electrodes to accommodate ion motion in and out and close contact between the thin nested tubes to ensure fast transport for both ions and electrons.

This work was performed at the University of Maryland and was supported by the Nanostructures for Electrical Energy Storage (NEES) Center, an Energy Frontier Research Center funded by the DOE Office of Science, Office of Basic Energy Sciences.

Story Source:

The above post is reprinted from materials provided by Department of Energy, Office of Science. Note: Materials may be edited for content and length.

Journal References:

  1. Chanyuan Liu, Eleanor I. Gillette, Xinyi Chen, Alexander J. Pearse, Alexander C. Kozen, Marshall A. Schroeder, Keith E. Gregorczyk, Sang Bok Lee, Gary W. Rubloff. An all-in-one nanopore battery array. Nature Nanotechnology, 2014; 9 (12): 1031 DOI: 10.1038/nnano.2014.247
  2. Paul V. Braun, Ralph G. Nuzzo. Batteries: Knowing when small is better. Nature Nanotechnology, 2014; 9 (12): 962 DOI: 10.1038/nnano.2014.263

There are no comments yet, but you can be the first

Recent Posts