14 Oct 2016
Recently, researchers at the National Renewable Energy Laboratory wanted to know, how well does NREL’s hydrogen infrastructure support fueling multiple fuel cell electric vehicles (FCEVs) for a day trip to the Rocky Mountains?
The answer-great! NREL staff took FCEVs on a trip to demonstrate real-world performance and range in high-altitude conditions. To start the trip, drivers filled three cars at NREL’s hydrogen fueling station. The cars made a 175-mile loop crossing two 11,000+ foot mountain passes on the way. Back at NREL, the cars were filled up with hydrogen in ~5 minutes and ready to go again. Learn more at http://www.nrel.gov/hydrogen.
Genesis Nanotechnology, Inc. ~ “Great Things from Small Things”
Read More on Nano Enabled Fuel Cell Technologies for many more Energy Applications: Genesis Nanotechnology Fuel Cell Articles & Videos
07 Oct 2016
** Special to the Washington Post
The batteries that power our high-tech lifestyle are built using materials extracted in dirty, often life-threatening conditions.
If you have a cell phone, laptop, a hybrid car, or an electric vehicle, you may want to sit down. This may hurt.
You have probably heard of blood diamonds and conflict minerals. Maybe you’ve even read up a bit on how big consumer tech companies are trying (and, in some cases, being forced by governments) to sort out where the materials that go into their gadgets come from. But stories about “supply chains,” “globalization,” and “poor working conditions” can seem a world away, or just plain academic.
In a sweeping, heartbreaking series, the Washington Post is making sure it hits home.
Take the example of Yu Yuan, a farmer who lives near a graphite factory in northeastern China. In a video, he swipes at shimmering grime accumulated in his window sill and points at a barren cornfield.
The crops turn black with graphite dust he says, and don’t grow properly. He and his wife worry about the air they’re breathing and their water is undrinkable, polluted by chemicals dumped from the graphite plant. “There is nothing here once the factory is done damaging this place,” he says.
Workers in Lubumbashi, Democratic Republic of the Congo, tend to an oven that processes slag from the region’s cobalt and copper-rich ores.
Over two pieces so far, the Post has traced the path of first cobalt and then graphite as they make their way from mines to factories and ultimately into our hands as the cathodes and anodes, respectively, for lithium-ion batteries.
Each story is a remarkable blend of globe-spanning investigative journalism, business reporting, and an appeal to us to confront the consequences of owning the devices that power our high-tech lifestyles.
While graphite is mined and processed mostly in China, a huge amount of cobalt comes from mines in the Democratic Republic of the Congo, where “artisanal” miners sometimes dig through the floor of their own houses in search of ore. Mines collapse frequently. Injuries and death are commonplace.
Once extracted, the materials end up in Asia, where companies you’ve probably never heard of turn them into battery parts. The largest battery makers in the world, including Samsung SDI, LG Chem, and Panasonic, then purchase the components and turn them into batteries that go into phones, computers, and cars. (article continued below)
A “New Way” to Power Our World?
Read (Watch the YouTube Video Below) About a New Energy Storage Company ~ Making Energy Dense, Flexible Form, Rapid Charge/ Re-Charge Super Capacitors and Batteries for Medical Devices, Drone Batteries, Power Banks, Motorcycle and EV Batteries, developed from a Rice University Technology using ‘Nanoporous Nickle’ and ‘Si Nano Wires.
(article continued) Lithium batteries are prized for being light and having a high energy density compared to other battery chemistries. The modern smartphone would be difficult to imagine without a lithium battery as its power supply. They help power hybrid cars, and the small but fast-growing fleet of all-electric vehicles wouldn’t exist without them.
Interest in electric cars, in particular, is fueled by claims that the vehicles are clean and good for the environment. That may be true in the countries where they are mostly sold. But when we consider the bigger picture, the reality is something else altogether.
Read More: MIT Review – August 2016
Startups with novel chemistries tend to falter before they reach full production.
Earlier this year, Ellen Williams, the director of ARPA-E, the U.S. Department of Energy’s advanced research program for alternative energy, made headlines when she told the Guardiannewspaper that “We have reached some holy grails in batteries.”
Despite very promising results from the 75-odd energy-storage research projects that ARPA-E funds, however, the grail of compact, low-cost energy storage remains elusive.
A number of startups are closer to producing devices that are economical, safe, compact, and energy-dense enough to store energy at a cost of less than $100 a kilowatt-hour. Energy storage at that price would have a galvanic effect, overcoming the problem of powering a 24/7 grid with renewable energy that’s available only when the wind blows or the sun shines, and making electric vehicles lighter and less expensive.
But those batteries are not being commercialized at anywhere near the pace needed to hasten the shift from fossil fuels to renewables. Even Tesla CEO Elon Musk, hardly one to underplay the promise of new technology, has been forced to admit that, for now, the electric-car maker is engaged in a gradual slog of enhancements to its existing lithium-ion batteries, not a big leap forward.
In fact, many researchers believe energy storage will have to take an entirely new chemistry and new physical form, beyond the lithium-ion batteries that over the last decade have shoved aside competing technologies in consumer electronics, electric vehicles, and grid-scale storage systems. In May the DOE held a symposium entitled “Beyond Lithium-Ion.” The fact that it was the ninth annual edition of the event underscored the technological challenges of making that step.
Qichao Hu, the founder of SolidEnergy Systems, has developed a lithium-metal battery (which has a metallic anode, rather than the graphite material used for the anode in traditional lithium-ion batteries) that offers dramatically improved energy density over today’s devices (see“Better Lithium Batteries to Get a Test Flight”). The decade-long process of developing the new system highlighted one of the main hurdles in battery advancement: “In terms of moving from an idea to a product,” says Hu, “it’s hard for batteries, because when you improve one aspect, you compromise other aspects.”
Added to this is the fact that energy storage research has a multiplicity problem: there are so many technologies, from foam batteries to flow batteries to exotic chemistries, that no one clear winner is attracting most of the funding and research activity.
According to a recent analysis of more than $4 billion in investments in energy storage by Lux Research, startups developing “next-generation” batteries—i.e., beyond lithium-ion—averaged just $40 million in funding over eight years. Tesla’s investment in its Gigafactory, which will produce lithium-ion batteries, will total around $5 billion. That huge investment gap is hard to overcome.
“It will cost you $500 million to set up a small manufacturing line and do all the minutiae of research you need to do to make the product,” says Gerd Ceder, a professor of materials science at the University of California, Berkeley, who heads a research group investigating novel battery chemistries. Automakers, he points out, may test new battery systems for years before making a purchase decision. It’s hard to invest $500 million in manufacturing when your company has $5 million in funding a year.
Even if new battery makers manage to bring novel technologies to market, they face a dangerous period of ramping up production and finding buyers. Both Leyden Energy and A123 Systems failed after developing promising new systems, as their cash needs climbed and demand failed to meet expectations. Two other startups, Seeo and Sakti3, were acquired before they reached mass production and significant revenues, for prices below what their early-stage investors probably expected.
Meanwhile, the Big Three battery producers, Samsung, LG, and Panasonic, are less interested in new chemistries and radical departures in battery technology than they are in gradual improvements to their existing products. And innovative battery startups face one major problem they don’t like to mention: lithium-ion batteries, first developed in the late 1970s, keep getting better.
Read more: Why We Still Don’t Have Better Batteries The Washington Post
Genesis Nanotechnology, Inc.
Follow and ‘Like’ Us on Facebook: https://www.facebook.com/GenesisNanoTech/
Follow Us On Twitter: https://twitter.com/GenesisNanoTech
“Join the Conversation” on Our LinkedIn ‘Nano Network’ Group:https://www.linkedin.com/groups/3935461
Connect To Our Website: http://genesisnanotech.com/
Watch Our YouTube Video: https://youtu.be/Y1618kgUSXI
Follow Our ‘Top Ten’ Blog: “Great Things from Small Things”: https://genesisnanotech.wordpress.com/
Contact with Your Comments – We Love Hearing from You!
Credit: American Chemical Society
Batteries in smart phones and other portable electronics often die at inopportune times. Carrying a spare battery is one solution. As an alternative, researchers have tried to create fibers to incorporate in clothing that would power these devices. However, many of these fibers can’t withstand clothing manufacturing, especially weaving and cutting.
Now, in the journal ACS Nano, scientists report the first fibers suitable for weaving into tailorable textiles that can capture and release solar energy.
To collect solar power, Wenjie Mai, Xing Fan and colleagues created two different types of fibers. One contained titanium or a manganese-coated polymer along with zinc oxide, a dye and an electrolyte. These fibers were then interlaced with copper-coated polymer wires to create the solar cell section of the textile. To store power, the researchers developed a second type of fiber. This one was made of titanium, titanium nitride, a thin carbon shell to prevent oxidation and an electrolyte. These fibers were woven with cotton yarn.
When combined, the new materials formed a flexible textile that the team could cut and tailor into a “smart garment” that was fully charged by sunlight. The researchers say the clothing could potentially power small electronics including tablets and phones.(Article Continues Below – After Tenka Energy Story)
Read About (Watch the YouTube Video)
Tenka Energy, LLC is developing and commercializing the Next Generation of Super-Capacitors andBatteries, providing the High-Energy-Density,in Flexible-Thin-Form with Rapid Charge/ Recharge Cycles with Extended Life that is required and in high demand from a“power starved world”. The opportunity is based on a Nanoporous-Nickel Flexible Thin-form technology that is easily scaled, from Rice University. Applications: Powered Smart Cards, Wearable Electronics, Drone Batteries, Medical Devices, Motorcycle and EV Batteries – just to name a few!
(Article Continued) Explore further: New fabric uses sun and wind to power devices
More information: Zhisheng Chai et al. Tailorable and Wearable Textile Devices for Solar Energy Harvesting and Simultaneous Storage, ACS Nano(2016). DOI: 10.1021/acsnano.6b05293
The pursuit of harmonic combination of technology and fashion intrinsically points to the development of smart garments. Herein, we present an all-solid tailorable energy textile possessing integrated function of simultaneous solar energy harvesting and storage, and we call it tailorable textile device. Our technique makes it possible to tailor the multifunctional textile into any designed shape without impairing its performance and produce stylish smart energy garments for wearable self-powering system with enhanced user experience and more room for fashion design.
The “threads” (fiber electrodes) featuring tailorability and knittability can be large-scale fabricated and then woven into energy textiles. The fiber supercapacitor with merits of tailorability, ultrafast charging capability, and ultrahigh bending-resistance is used as the energy storage module, while an all-solid dye-sensitized solar cell textile is used as the solar energy harvesting module. Our textile sample can be fully charged to 1.2 V in 17 s by self-harvesting solar energy and fully discharged in 78 s at a discharge current density of 0.1 mA.
Genesis Nanotechnology, Inc. ~ “Great Things from Small Things”
07 Oct 2016
Equipment at a brewery. Credit: FTGallo / Wikipedia.
University of Colorado Boulder engineers have developed an innovative bio-manufacturing process that uses a biological organism cultivated in brewery wastewater to create the carbon-based materials needed to make energy storage cells.
This unique pairing of breweries and batteries could set up a win-win opportunity by reducing expensive wastewater treatment costs for beer makers while providing manufacturers with a more cost-effective means of creating renewable, naturally-derived fuel cell technologies.
“Breweries use about seven barrels of water for every barrel of beer produced,” said Tyler Huggins, a graduate student in CU Boulder’s Department of Civil, Environmental and Architectural Engineering and lead author of the new study. “And they can’t just dump it into the sewer because it requires extra filtration.”
The process of converting biological materials, or biomass, such as timber into carbon-based battery electrodes is currently used in some energy industry sectors. But, naturally-occurring biomass is inherently limited by its short supply, impact during extraction and intrinsic chemical makeup, rendering it expensive and difficult to optimize.
However, the CU Boulder researchers utilize the unsurpassed efficiency of biological systems to produce sophisticated structures and unique chemistries by cultivating a fast-growing fungus, Neurospora crassa, in the sugar-rich wastewater produced by a similarly fast-growing Colorado industry: breweries.
“The wastewater is ideal for our fungus to flourish in, so we are happy to take it,” said Huggins.
By cultivating their feedstock in wastewater, the researchers were able to better dictate the fungus’s chemical and physical processes from the start. They thereby created one of the most efficient naturally-derived lithium-ion battery electrodes known to date while cleaning the wastewater in the process.
The findings were published recently in the American Chemical Society journal Applied Materials & Interfaces.
If the process were applied on a large scale, breweries could potentially reduce their municipal wastewater costs significantly while manufacturers would gain access to a cost-effective incubating medium for advanced battery technology components.
“The novelty of our process is changing the manufacturing process from top-down to bottom-up,” said Zhiyong Jason Ren, an associate professor in CU Boulder’s Department of Civil, Environmental and Architectural Engineering and a co-author of the new study. “We’re biodesigning the materials right from the start.”
Huggins and study co-author Justin Whiteley, also of CU Boulder, have filed a patent on the process and created Emergy, a Boulder-based company aimed at commercializing the technology.
“We see large potential for scaling because there’s nothing required in this process that isn’t already available,” said Huggins.
The researchers have partnered with Avery Brewing in Boulder in order to explore a larger pilot program for the technology. Huggins and Whiteley recently competed in the finals of a U.S. Department of Energy-sponsored startup incubator competition at the Argonne National Laboratory in Chicago, Illinois.
“This research speaks to the spirit of entrepreneurship at CU Boulder,” said Ren, who plans to continue experimenting with the mechanisms and properties of the fungus growth within the wastewater. “It’s great to see students succeeding and creating what has the potential to be a transformative technology. Energy storage represents a big opportunity for the state of Colorado and beyond.”
Explore further: Researchers use wastewater treatment to capture CO2, produce energy
More information: Tyler M. Huggins et al. Controlled Growth of Nanostructured Biotemplates with Cobalt and Nitrogen Codoping as a Binderless Lithium-Ion Battery Anode, ACS Applied Materials & Interfaces (2016). DOI: 10.1021/acsami.6b09300
07 Oct 2016
Oil and gas operations in the United States produce about 21 billion barrels of wastewater per year. The saltiness of the water and the organic contaminants it contains have traditionally made treatment difficult and expensive.
Engineers at the University of Colorado Boulder have invented a simpler process that can simultaneously remove both salts and organic contaminants from the wastewater, all while producing additional energy. The new technique, which relies on a microbe-powered battery, was recently published in thejournal Environmental Science Water Research & Technology as the cover story.
“The beauty of the technology is that it tackles two different problems in one single system,” said Zhiyong Jason Ren, a CU-Boulder associate professor of environmental and sustainability engineering and senior author of the paper. “The problems become mutually beneficial in our system—they complement each other—and the process produces energy rather than just consumes it.”
The new treatment technology, called microbial capacitive desalination, is like a battery in its basic form, said Casey Forrestal, a CU-Boulder postdoctoral researcher who is the lead author of the paper and working to commercialize the technology. “Instead of the traditional battery, which uses chemicals to generate the electrical current, we use microbes to generate an electrical current that can then be used for desalination.”
This microbial electro-chemical approach takes advantage of the fact that the contaminants found in the wastewater contain energy-rich hydrocarbons, the same compounds that make up oil andnatural gas. The microbes used in the treatment process eat the hydrocarbons and release their embedded energy. The energy is then used to create a positively charged electrode on one side of the cell and a negatively charged electrode on the other, essentially setting up a battery.
Because salt dissolves into positively and negatively charged ions in water, the cell is then able to remove the salt in the wastewater by attracting the charged ions onto the high-surface-area electrodes, where they adhere.
Not only does the system allow the salt to be removed from the wastewater, but it also creates additional energy that could be used on site to run equipment, the researchers said.
“Right now oil and gas companies have to spend energy to treat the wastewater,” Ren said. “We are able to treat it without energy consumption; rather we extract energy out of it.”
Some oil and gas wastewater is currently being treated and reused in the field, but that treatment process typically requires multiple steps—sometimes up to a dozen—and an input of energy that may come from diesel generators.
Because of the difficulty and expense, wastewater is often disposed of by injecting it deep underground. The need to dispose of wastewater has increased in recent years as the practice of hydraulic fracturing, or “fracking,” has boomed. Fracking refers to the process of injecting a slurry of water, sand and chemicals into wells to increase the amount of oil and natural gas produced by the well.
Injection wells that handle wastewater from fracking operations can cause earthquakes in the region, according to past research by CU-Boulder scientists and others.
The demand for water for fracking operations also has caused concern among people worried about scarce water resources, especially in arid regions of the country. Finding water to buy for fracking operations in the West, for example, has become increasingly challenging and expensive for oil and gas companies.
Ren and Forrestal’s microbial capacitive desalination cell offers the possibility that water could be more economically treated on site and reused for fracking.
To try to turn the technology into a commercial reality, Ren and Forrestal have co-founded a startup company called BioElectric Inc. In order to determine if the technology offers a viable solution for oil and gas companies, the pair first has to show they can scale up the work they’ve been doing in the lab to a size that would be useful in the field.
The cost to scale up the technology also needs to be competitive with what oil and gas companies are paying now to buy water to use for fracking, Forrestal said. There also is some movement in state legislatures to require oil and gas companies to reuse wastewater, which could make BioElectric’s product more appealing even at a higher price, the researchers said.
MIT spinout makes treating, recycling highly contaminated oilfield water more economical
Explore further: New contaminants found in oil and gas wastewater
More information: “Microbial capacitive desalination for integrated organic matter and salt removal and energy production from unconventional natural gas produced water.” Environ. Sci.: Water Res. Technol., 2015,1, 47-55 DOI: 10.1039/C4EW00050A
Genesis Nanotechnology ~ “Great Things from Small Things”
YouTube Video: Genesis Nanotechnology Nano Enabled Water Treatment; Quantum Dots from Coal & More