Great things from small things

Blog Archive

Home
2017
Archive for: March
  
Published January 2017

As it turns out, Tesla, and its battery partner Panasonic, started production of cells for qualification at the plant in December, but today, it confirmed the start of “mass production” of the new battery cell, which will enable several of Tesla’s new products, including the Model 3.

The new cell is called ‘2170’ because it’s 21mm by 70mm. It’s thicker and taller than the previous cell that Tesla developed with Panasonic, which was in an ‘18650’ cell format.

Tesla CEO Elon Musk has been boasting about the new cell over the past few month. He said that it’s the “highest energy density cell in the world and also the cheapest”.

A battery that can be charged in seconds, has a large capacity and lasts ten to twelve years? Certainly, many have wanted such a thing. Now the FastStorageBW II project – which includes Fraunhofer – is working on making it a reality. Fraunhofer researchers are using pre-production to optimize large-scale production and ensure it follows the principles of Industrie 4.0 from the outset.

Imagine you’ve had a hectic day and then, to cap it all, you find that the battery of your electric vehicle is virtually empty. This means you’ll have to take a long break while it charges fully. It’s a completely different story with capacitors, which charge in seconds. However, they have a different drawback: they store very little energy.electric cars images

In the FastStorageBW II project, funded by the Baden-Württemberg Ministry of Economic Affairs, researchers from the Fraunhofer Institute for Manufacturing Engineering and Automation IPA in Stuttgart, together with colleagues from the battery manufacturer VARTA AG and other partners, are developing a powerful hybrid storage system that combines the advantages of lithium-ion batteries and .

“The PowerCaps have a specific capacity as high as lead batteries, a long life of ten to twelve years, and charge in a matter of seconds like a supercapacitor,” explains Joachim Montnacher, Head of the Energy business unit at Fraunhofer IPA. What’s more, PowerCaps can operate at temperatures of up to 85 degree Celsius. They withstand a hundred times more charge cycles than conventional battery systems and retain their charge over several weeks without any significant losses due to self-discharge.

Elon+Musk+cVLpwWp3rxJmAlso Read About: Supercapacitor breakthrough suggests EVs could charge in seconds but with a trade-off

“Supercapacitors may be providing an alternative to electric-car batteries sooner than expected, according to a new research study. Currently, supercapacitors can charge and discharge rapidly over very large numbers of cycles, but their poor energy density per kilogram —- at just one twentieth of existing battery technology — means that they can’t compete with batteries in most applications. That’s about to change, say researchers from the University of Surrey and University of Bristol in conjunction with Augmented Optics.

Large-scale production with minimum risk

The Fraunhofer IPA researchers’ main concern is with manufacturing: to set up new battery production, it is essential to implement the relevant process knowledge in the best possible way.

After all, it costs millions of euros to build a complete manufacturing unit. “We make it possible for battery manufacturers to install an intermediate step – a small-scale production of sorts – between laboratory production and large-scale production,” says Montnacher. “This way, we can create ideal conditions for large-scale production, optimize processes and ensure production follows the principles of Industrie 4.0 from the outset. Because in the end, that will give companies a competitive advantage.” Another benefit is that this cuts the time it takes to ramp up production by more than 50 percent.

For this innovative small-scale production setup, researchers cleverly combine certain production sequences. However, not all systems are connected to each other – at least, as far as the hardware is concerned. More often, it is an employee that carries the batches from one machine to the next. Ultimately, it is about developing a comprehensive understanding of the process, not about producing the greatest number of in the shortest amount of time. For example, this means clarifying questions such as if the desired quality can be reproduced. The systems are designed as flexibly as possible so that they can be used for different production variations.

Making large-scale production compatible with Industrie 4.0

As far as software is concerned, the systems are thoroughly connected. Like process clusters, they are also equipped with numerous sensors, which show the clusters what data to capture for each of the process steps. They communicate with one another and store the results in a cloud. Researchers and entrepreneurs can then use this data to quickly analyze which factors influence the quality of the product – Does it have Industrie 4.0 capability? Were the right sensors selected? Do they deliver the desired data? Where are adjustments required?

Fraunhofer IPA is also applying its expertise beyond the area of production technology: The scientists are developing business models for the marketing of cells, they are analyzing resource availability, and they are optimizing the subsequent recycling of PowerCaps.

Explore further: Virtual twin controls production

Provided by: Fraunhofer-Gesellschaft

Watch a YouTube Video in ‘Next Generation’ Energy-Dense Si-Nanowire Batteries

*** Bill Gates: Original Post From gatesnotes.com  

The sun was out in full force the fall morning I arrived at Caltech to visit Professor Nate Lewis’s research laboratory. Temperatures in southern California had soared to 20 degrees above normal, prompting the National Weather Service to issue warnings for extreme fire danger and heat-related illnesses.

The weather was a fitting introduction to what I had come to see inside Nate’s lab—how we might be able to tap the sun’s tremendous energy to make fuels to power cars, trucks, ships, and airplanes.

Stepping into the lab cluttered with computer screens, jars of chemicals, beakers, and other equipment, Nate handed me a pair of safety goggles and offered some advice for what I was about to see. “Everything we do is simple in the end, even though there’s lots of complicated stuff,” he said.

What’s simple is the idea behind all of his team’s research: The sun is the most reliable, plentiful source of renewable energy we have. In fact, more energy from the sun hits the Earth in one hour than humans use in an entire year. If we can find cheap and efficient ways to tap just a fraction of its power, we will go a long way toward finding a clean, affordable, and reliable energy source for the future.

We are all familiar with solar panels, which convert sunlight into electricity. As solar panel costs continue to fall, it’s been encouraging to see how they are becoming a growing source of clean energy around the world. Of course, there’s one major challenge of solar power. The sun sets each night and there are cloudy days. That’s why we need to find efficient ways to store the energy from sunlight so it’s available on demand. 

Batteries are one solution. Even better would be a solar fuel. Fuels have a much higher energy density than batteries, making it far easier to use for storage and transportation. For example, one ton of gasoline stores the same amount of energy as 60 tons of batteries. That’s why, barring a major breakthrough in battery technology, it’s hard to imagine flying from Seattle to Tokyo on a plug-in airplane. Solar Twist download

I’ve written before about the need for an energy miracle to halt climate change and provide access to electricity to millions of the poorest families who live without it. Making solar fuel would be one of those miracles. It would solve the energy storage problem for when the sun isn’t shining. And it would provide an easy-to-use power source for our existing transportation infrastructure. We could continue to drive the cars we have now. Instead of running on fossil fuels from the ground, they would be powered by fuel made from sunlight. And because it wouldn’t contribute additional greenhouses gases to the atmosphere, it would be carbon neutral. 

Imagining such a future is tantalizing. Realizing it will require a lot of hard work. No one knows if there’s a practical way to turn sunlight into fuel. Thanks to the U.S. Department of Energy, Nate and a group of other researchers around the U.S. are receiving research support to find out if it is possible.

We live in a time when new discoveries and innovations are so commonplace that it’s easy to take the cutting-edge research I saw at Caltech for granted. But most breakthroughs that improve our lives—from new health interventions to new clean energy ideas—get their start as government-sponsored research like Nate’s. If successful, that research leads to new innovations, that spawn new industries, that create new jobs, that spur economic growth. It’s impossible to overemphasize the importance of government support in this process. Without it, human progress would not come as far as it has.

tenka-growing-plants-082616-picture1Nate and his team are still at the first stage of this process. But they have reason to be optimistic about what lies ahead. After all, turning sunlight into chemical energy is what plants do every day. Through the process of photosynthesis, plants combine sunlight, water, and carbon dioxide to store solar energy in chemical bonds. At Nate’s lab, his team is working with the same ingredients. The difference is that they need to figure out how to do it even better and beat nature at its own game.

“We want to create a solar fuel inspired by what nature does, in the same way that man built aircraft inspired by birds that fly,” Nate said. “But you don’t build an airplane out of feathers. And we’re not going to build an artificial photosynthetic system out of chlorophylls and living systems, because we can do better than that.”

One of Nate’s students showed me how light can be used to split water into oxygen and hydrogen—a critical first step in the path to solar fuels. The next step would involve combining hydrogen with carbon dioxide to make fuels. Using current technologies, however, it is too costly to produce a fuel from sunlight. To make it cheaper, much more research needs to be done to understand the materials and systems that could create a dependable source of solar fuel.hydrogen-earth-150x150

One idea his team is working on is a kind of artificial turf made of plastic cells that could be easily rolled out to capture sunlight to make fuel. Each plastic cell would contain water, light absorbers, and a catalyst. The catalyst helps accelerate the chemical reactions so each cell can produce hydrogen or carbon-based fuels more efficiently. Unfortunately, the best catalysts are among the rarest and most expensive elements, like platinum. A key focus of Nate’s research is finding other catalysts that are not only effective and durable, but also economical.

Nate’s interest in clean energy research started during the oil crisis in the 1970s, when he waited for hours in gas lines with his dad. He says he knew then that he wanted to dedicate his life to energy research. Now, he is helping to train a new generation of scientists to help solve our world’s energy challenge. Seeing the number of young people working in Nate’s lab was inspiring. The pace of innovation for them is now much faster than ever before. “We do experiments now in a day that would once take a year or an entire Ph.D. thesis to do,” Nate said.

Still, I believe we should be doing a lot more. We need thousands of scientists following all paths that might lead us to a clean energy future. That’s why a group of investors and I recently launched Breakthrough Energy Ventures, a fund that will invest more than $1 billion in scientific discoveries that have the potential to deliver cheap and reliable clean energy to the world.

While we won’t be filling up our cars with solar fuels next week or next year, Nate’s team has already made valuable contributions to our understanding of how we might achieve this bold goal. With increased government and private sector support, we will make it possible for them to move ahead with their research at full speed.

This originally appeared on gatesnotes.com.

A new company Tenka Energy, LLC ™ has been formed to exploit and commercialize the Next Generation Super-Capacitors and Batteries. The opportunity is based on Nanoporous-Nickel Flexible Thin-Form, Scalable Super Capacitors and Si-Nanowire Battery Technologies with Exclusive IP Licensing Rights from Rice University.

… Problem 1: Current capacitors and batteries being supplied to the relevant markets lack the sustainable power density, discharge and recharge cycle and warranty life. Combined with a weight/ size challenge and the lack of a ‘flexible form factor’, existing solutions lack the ability to scale and manufacture at Low Cost, to satisfy the identified industries’ need for solutions that provide commercial viability & performance.

Solution: For Marine & Drone Batteries – Medical Devices

  • High Energy Density = 2X More Time on the Water; 2X Flight Time for Drones
  • Simplified Manufacturing = Lower Costs
  • Simple Electrode Architecture = Flex Form Factor (10X Energy Density Factor)
  • Flexible Form = Dramatically Less Weight and Better Weight Distribution
  • Easy to Scale Technology

To Read the Full Article Click on the Link Below:

  

 

Energy Storage: New Si-Nanowire Battery for Applications in Marine and Drone Battery Markets: w/Video


Recent Posts

Categories

Search