Great things from small things

Blog Archive

Filter by: Genesis Nanotechnology

MIT 1-implantable-film-MIT

MIT professor Paula Hammond (right) and Bryan Hsu PhD’ 14 have developed a nanoscale film that can be used to deliver medication, either directly through injections, or by coating implantable medical devices. Photo: Dominick Reuter

Nanoscale, biodegradable drug-delivery method could provide a year or more of steady doses.

About one in four older adults suffers from chronic pain. Many of those people take medication, usually as pills. But this is not an ideal way of treating pain: Patients must take medicine frequently, and can suffer side effects, since the contents of pills spread through the bloodstream to the whole body.

Now researchers at MIT have refined a technique that could enable pain medication and other drugs to be released directly to specific parts of the body — and in steady doses over a period of up to 14 months.  The method uses biodegradable, nanoscale “thin films” laden with drug molecules that are absorbed into the body in an incremental process.

“It’s been hard to develop something that releases [medication] for more than a couple of months,” says Paula Hammond, the David H. Koch Professor in Engineering at MIT, and a co-author of a new paper on the advance. “Now we’re looking at a way of creating an extremely thin film or coating that’s very dense with a drug, and yet releases at a constant rate for very long time periods.”

In the paper, published today in the Proceedings of the National Academy of Sciences, the researchers describe the method used in the new drug-delivery system, which significantly exceeds the release duration achieved by most commercial controlled-release biodegradable films.

“You can potentially implant it and release the drug for more than a year without having to go in and do anything about it,” says Bryan Hsu PhD ’14, who helped develop the project as a doctoral student in Hammond’s lab. “You don’t have to go recover it. Normally to get long-term drug release, you need a reservoir or device, something that can hold back the drug. And it’s typically nondegradable. It will release slowly, but it will either sit there and you have this foreign object retained in the body, or you have to go recover it.”

Layer by layer

The paper was co-authored by Hsu, Myoung-Hwan Park of Shamyook University in South Korea, Samantha Hagerman ’14, and Hammond, whose lab is in the Koch Institute for Integrative Cancer Research at MIT.

The research project tackles a difficult problem in localized drug delivery: Any biodegradable mechanism intended to release a drug over a long time period must be sturdy enough to limit hydrolysis, a process by which the body’s water breaks down the bonds in a drug molecule. If too much hydrolysis occurs too quickly, the drug will not remain intact for long periods in the body. Yet the drug-release mechanism needs to be designed such that a drug molecule does, in fact, decompose in steady increments.

To address this, the researchers developed what they call a “layer-by-layer” technique, in which drug molecules are effectively attached to layers of thin-film coating. In this specific case, the researchers used diclofenac, a nonsteroidal anti-inflammatory drug that is often prescribed for osteoarthritis and other pain or inflammatory conditions. They then bound it to thin layers of poly-L-glutamatic acid, which consists of an amino acid the body reabsorbs, and two other organic compounds. The film can be applied onto degradable nanoparticles for injection into local sites or used to coat permanent devices, such as orthopedic implants.

In tests, the research team found that the diclofenac was steadily released over 14 months. Because the effectiveness of pain medication is subjective, they evaluated the efficacy of the method by seeing how well the diclofenac blocked the activity of cyclooxygenase (COX), an enzyme central to inflammation in the body.

“We found that it remains active after being released,” Hsu says, meaning that the new method does not damage the efficacy of the drug. Or, as the paper notes, the layer-by-layer method produced “substantial COX inhibition at a similar level” to pills.

The method also allows the researchers to adjust the quantity of the drug being delivered, essentially by adding more layers of the ultrathin coating.

A viable strategy for many drugs

Hammond and Hsu note that the technique could be used for other kinds of medication; an illness such as tuberculosis, for instance, requires at least six months of drug therapy.

“It’s not only viable for diclofenac,” Hsu says. “This strategy can be applied to a number of drugs.”

Indeed, other researchers who have looked at the paper say the potential medical versatility of the thin-film technique is of considerable interest.

“I find it really intriguing because it’s broadly applicable to a lot of systems,” says Kathryn Uhrich, a professor in the Department of Chemistry and Chemical Biology at Rutgers University, adding that the research is “really a nice piece of work.”

To be sure, in each case, researchers will have to figure out how best to bind the drug molecule in question to a biodegradable thin-film coating. The next steps for the researchers include studies to optimize these properties in different bodily environments and more tests, perhaps with medications for both chronic pain and inflammation.

A major motivation for the work, Hammond notes, is “the whole idea that we might be able to design something using these kinds of approaches that could create an [easier] lifestyle” for people with chronic pain and inflammation.

Hsu and Hammond were involved in all aspects of the project and wrote the paper, while Hagerman and Park helped perform the research, and Park helped analyze the data.

The research described in the paper was supported by funding from the U.S. Army and the U.S. Air Force.

It’s time for an update on graphene, that super material of the future! Scientists have come up with some new ways of making it that are easier and cheaper than ever before.

“Fascination with this material stems from its remarkable physical properties and the potential applications these properties offer for the future. Although scientists knew one atom thick, two-dimensional crystal graphene existed, no-one had worked out how to extract it from graphite.”



More ….

Charge Your Cell Phone In 5 Seconds

Supercapacitors: They’ll enable you to charge your cell phone in 5 seconds, or an electric car in about a minute. They’re cheap, biodegradable, never wear out and as Trace’ll tell you, could be powering your life sooner than you’d think.



Still More …

Scientists cook up material 200 times stronger than steel out of soybean oil

Soyben Graphene 8223748-16x9-large“Many production techniques involve the use of intense heat in a vacuum, and expensive ingredients like high-purity metals and explosive compressed gases. Now a team of Australian scientists has detailed how they turned cheap everyday ingredients into graphene under normal air conditions. They said the research, published today in the journal Nature Communications, may open up a new avenue for the low-cost synthesis of the highly sought-after material.” Click on the Link below to read more:

Scientists cook up material 200 times stronger than steel out of soybean oil

• HDIAC utilizes expertise and knowledge from government agencies, research institutions, laboratories, industry and academia on topics relevant to the DoD and other government entities to solve the government’s toughest scientific and technical problems

• Develop two State-of-the-Art Reports each year on a pressing topic related to the Defense community within HDIAC focus areasMilitary Nano IV 0

• Manipulation of matter on a scale of 1 to 100 nanometers (nm) in at least one dimension to create new structures and materials

• The modification of surfaces is fundamental to engineering and technological innovation, because almost everything about a product or device can be affected by its surface functionality and interaction with the environment.




Read More …

PDF Documents for HDIAC Webinar Presentation

The way energy is produced, distributed and consumed around the world is undergoing fundamental change of almost unprecedented proportions. This is commonly referred to as the “energy transition”. (watch the video)


The Global Energy Architecture Performance Index 2017 (EAPI), tackles elements of this transition in its fifth annual edition, as do the global Regulatory Indicators for Sustainable Energy (RISE) released by the World Bank a month earlier. Of specific interest to this essay are the underlying issues of governance and regulation and their relationship to progress towards sustainable and secure energy systems. In UN development terms, this focus helps us consider the links between Sustainable Development Goal (SDG) 7, which addresses energy, and SDG 16, which is about peace and justice.

Researchers have developed a rubber-like fiber, shown here, that can flex and stretch while simultaneously delivering both optical impulses, for optoelectronic stimulation, and electrical connections, for stimulation and monitoring. Image: Chi (Alice) Lu and Seongjun Park

Rubbery, multifunctional fibers could be used to study spinal cord neurons and potentially restore function.

Implantable fibers have been an enormous boon to brain research, allowing scientists to stimulate specific targets in the brain and monitor electrical responses. But similar studies in the nerves of the spinal cord, which might ultimately lead to treatments to alleviate spinal cord injuries, have been more difficult to carry out.

That’s because the spine flexes and stretches as the body moves, and the relatively stiff, brittle fibers used today could damage the delicate spinal cord tissue.

Now, researchers have developed a rubber-like fiber that can flex and stretch while simultaneously delivering both optical impulses, for optoelectronic stimulation, and electrical connections, for stimulation and monitoring. The new fibers are described in a paper in the journal Science Advances, by MIT graduate students Chi (Alice) Lu and Seongjun Park, Professor Polina Anikeeva, and eight others at MIT, the University of Washington, and Oxford University.

“I wanted to create a multimodal interface with mechanical properties compatible with tissues, for neural stimulation and recording,” as a tool for better understanding spinal cord functions, says Lu. But it was essential for the device to be stretchable, because “the spinal cord is not only bending but also stretching during movement.” The obvious choice would be some kind of elastomer, a rubber-like compound, but most of these materials are not adaptable to the process of fiber drawing, which turns a relatively large bundle of materials into a thread that can be narrower than a hair.

The spinal cord “undergoes stretches of about 12 percent during normal movement,” says Anikeeva, who is the Class of 1942 Career Development Professor in the Department of Materials Science and Engineering. “You don’t even need to get into a ‘downward dog’ [yoga position] to have such changes.” So finding a material that can match that degree of stretchiness could potentially make a big difference to research. “The goal was to mimic the stretchiness and softness and flexibility of the spinal cord,” she says. “You can match the stretchiness with a rubber. But drawing rubber is difficult — most of them just melt,” she says.

“Eventually, we’d like to be able to use something like this to combat spinal cord injury. But first, we have to have biocompatibility and to be able to withstand the stresses in the spinal cord without causing any damage,” she says.










The fibers are not only stretchable but also very flexible. “They’re so floppy, you could use them to do sutures, and do light delivery at the same time,” professor Polina Anikeeva says. (Video: Chi (Alice) Lu and Seongjun Park)

The team combined a newly developed transparent elastomer, which could act as a waveguide for optical signals, and a coating formed of a mesh of silver nanowires, producing a conductive layer for the electrical signals. To process the transparent elastomer, the material was embedded in a polymer cladding that enabled it to be drawn into a fiber that proved to be highly stretchable as well as flexible, Lu says. The cladding is dissolved away after the drawing process.

After the entire fabrication process, what’s left is the transparent fiber with electrically conductive, stretchy nanowire coatings. “It’s really just a piece of rubber, but conductive,” Anikeeva says. The fiber can stretch by at least 20 to 30 percent without affecting its properties, she says.

The fibers are not only stretchable but also very flexible. “They’re so floppy, you could use them to do sutures and deliver light  at the same time,” she says.

“We’re the first to develop something that enables simultaneous electrical recording and optical stimulation in the spinal cords of freely moving mice,” Lu says. “So we hope our work opens up new avenues for neuroscience research.” Scientists doing research on spinal cord injuries or disease usually must use larger animals in their studies, because the larger nerve fibers can withstand the more rigid wires used for stimulus and recording. While mice are generally much easier to study and available in many genetically modified strains, there was previously no technology that allowed them to be used for this type of research, she says.

“There are many different types of cells in the spinal cord, and we don’t know how the different types respond to recovery, or lack of recovery, after an injury,” she says. These new fibers, the researchers hope, could help to fill in some of those blanks.

The team included Alexander Derry, Chong Hou, Siyuan Rao, Jeewoo Kang, and professor Yoel Fink at MIT; Tom Richner and professor Chet Mortiz at the University of Washington; and Imogen Brown at Oxford University. The research was supported by the National Science Foundation, the National Institute of Neurological Disorders and Stroke, the U.S. Army Research Laboratory, and the U.S. Army Research Office through the Institute for Soldier Nanotechnologies at MIT.

A graphene membrane. Credit: The University of Manchester


“By 2025 the UN expects that 14% of the world’s population will encounter water scarcity.”

Graphene-oxide membranes have attracted considerable attention as promising candidates for new filtration technologies. Now the much sought-after development of making membranes capable of sieving common salts has been achieved.

New research demonstrates the real-world potential of providing for millions of people who struggle to access adequate clean water sources.

The new findings from a group of scientists at The University of Manchester were published today in the journal Nature Nanotechnology. Previously graphene-oxide membranes have shown exciting potential for gas separation and water filtration.

Graphene-oxide membranes developed at the National Graphene Institute have already demonstrated the potential of filtering out small nanoparticles, organic molecules, and even large salts. Until now, however, they couldn’t be used for sieving common salts used in technologies, which require even smaller sieves.

Previous research at The University of Manchester found that if immersed in water, graphene-oxide membranes become slightly swollen and smaller salts flow through the membrane along with water, but larger ions or molecules are blocked.

The Manchester-based group have now further developed these and found a strategy to avoid the swelling of the membrane when exposed to water. The in the membrane can be precisely controlled which can sieve common salts out of salty water and make it safe to drink.

As the effects of climate change continue to reduce modern city’s water supplies, wealthy modern countries are also investing in desalination technologies. Following the severe floods in California major wealthy cities are also looking increasingly to alternative water solutions.

WEF 2017 graphene-water-071115-rtrde3r1-628x330 (2)World Economic Forum: Can Graphene Make the World’s Water Clean?





When the common salts are dissolved in water, they always form a ‘shell’ of around the salts molecules. This allows the tiny capillaries of the graphene-oxide membranes to block the from flowing along with the water. Water molecules are able to pass through the membrane barrier and flow anomalously fast which is ideal for application of these membranes for desalination.

Professor Rahul Nair, at The University of Manchester said: “Realisation of scalable membranes with uniform pore size down to atomic scale is a significant step forward and will open new possibilities for improving the efficiency of desalination .

“This is the first clear-cut experiment in this regime. We also demonstrate that there are realistic possibilities to scale up the described approach and mass produce graphene-based membranes with required sieve sizes.”

Mr. Jijo Abraham and Dr. Vasu Siddeswara Kalangi were the joint-lead authors on the research paper: “The developed membranes are not only useful for desalination, but the atomic scale tunability of the pore size also opens new opportunity to fabricate membranes with on-demand filtration capable of filtering out ions according to their sizes.” said Mr. Abraham.

By 2025 the UN expects that 14% of the world’s population will encounter water scarcity. This technology has the potential to revolutionize water filtration across the world, in particular in countries which cannot afford large scale desalination plants.

It is hoped that graphene-oxide systems can be built on smaller scales making this technology accessible to countries which do not have the financial infrastructure to fund large plants without compromising the yield of fresh produced.

Explore further: Researchers develop hybrid nuclear desalination technique with improved efficiency

More information: Tunable sieving of ions using graphene oxide membranes, Nature Nanotechnology,

Published January 2017

As it turns out, Tesla, and its battery partner Panasonic, started production of cells for qualification at the plant in December, but today, it confirmed the start of “mass production” of the new battery cell, which will enable several of Tesla’s new products, including the Model 3.

The new cell is called ‘2170’ because it’s 21mm by 70mm. It’s thicker and taller than the previous cell that Tesla developed with Panasonic, which was in an ‘18650’ cell format.

Tesla CEO Elon Musk has been boasting about the new cell over the past few month. He said that it’s the “highest energy density cell in the world and also the cheapest”.

A battery that can be charged in seconds, has a large capacity and lasts ten to twelve years? Certainly, many have wanted such a thing. Now the FastStorageBW II project – which includes Fraunhofer – is working on making it a reality. Fraunhofer researchers are using pre-production to optimize large-scale production and ensure it follows the principles of Industrie 4.0 from the outset.

Imagine you’ve had a hectic day and then, to cap it all, you find that the battery of your electric vehicle is virtually empty. This means you’ll have to take a long break while it charges fully. It’s a completely different story with capacitors, which charge in seconds. However, they have a different drawback: they store very little energy.electric cars images

In the FastStorageBW II project, funded by the Baden-Württemberg Ministry of Economic Affairs, researchers from the Fraunhofer Institute for Manufacturing Engineering and Automation IPA in Stuttgart, together with colleagues from the battery manufacturer VARTA AG and other partners, are developing a powerful hybrid storage system that combines the advantages of lithium-ion batteries and .

“The PowerCaps have a specific capacity as high as lead batteries, a long life of ten to twelve years, and charge in a matter of seconds like a supercapacitor,” explains Joachim Montnacher, Head of the Energy business unit at Fraunhofer IPA. What’s more, PowerCaps can operate at temperatures of up to 85 degree Celsius. They withstand a hundred times more charge cycles than conventional battery systems and retain their charge over several weeks without any significant losses due to self-discharge.

Elon+Musk+cVLpwWp3rxJmAlso Read About: Supercapacitor breakthrough suggests EVs could charge in seconds but with a trade-off

“Supercapacitors may be providing an alternative to electric-car batteries sooner than expected, according to a new research study. Currently, supercapacitors can charge and discharge rapidly over very large numbers of cycles, but their poor energy density per kilogram —- at just one twentieth of existing battery technology — means that they can’t compete with batteries in most applications. That’s about to change, say researchers from the University of Surrey and University of Bristol in conjunction with Augmented Optics.

Large-scale production with minimum risk

The Fraunhofer IPA researchers’ main concern is with manufacturing: to set up new battery production, it is essential to implement the relevant process knowledge in the best possible way.

After all, it costs millions of euros to build a complete manufacturing unit. “We make it possible for battery manufacturers to install an intermediate step – a small-scale production of sorts – between laboratory production and large-scale production,” says Montnacher. “This way, we can create ideal conditions for large-scale production, optimize processes and ensure production follows the principles of Industrie 4.0 from the outset. Because in the end, that will give companies a competitive advantage.” Another benefit is that this cuts the time it takes to ramp up production by more than 50 percent.

For this innovative small-scale production setup, researchers cleverly combine certain production sequences. However, not all systems are connected to each other – at least, as far as the hardware is concerned. More often, it is an employee that carries the batches from one machine to the next. Ultimately, it is about developing a comprehensive understanding of the process, not about producing the greatest number of in the shortest amount of time. For example, this means clarifying questions such as if the desired quality can be reproduced. The systems are designed as flexibly as possible so that they can be used for different production variations.

Making large-scale production compatible with Industrie 4.0

As far as software is concerned, the systems are thoroughly connected. Like process clusters, they are also equipped with numerous sensors, which show the clusters what data to capture for each of the process steps. They communicate with one another and store the results in a cloud. Researchers and entrepreneurs can then use this data to quickly analyze which factors influence the quality of the product – Does it have Industrie 4.0 capability? Were the right sensors selected? Do they deliver the desired data? Where are adjustments required?

Fraunhofer IPA is also applying its expertise beyond the area of production technology: The scientists are developing business models for the marketing of cells, they are analyzing resource availability, and they are optimizing the subsequent recycling of PowerCaps.

Explore further: Virtual twin controls production

Provided by: Fraunhofer-Gesellschaft

Watch a YouTube Video in ‘Next Generation’ Energy-Dense Si-Nanowire Batteries

*** Bill Gates: Original Post From  

The sun was out in full force the fall morning I arrived at Caltech to visit Professor Nate Lewis’s research laboratory. Temperatures in southern California had soared to 20 degrees above normal, prompting the National Weather Service to issue warnings for extreme fire danger and heat-related illnesses.

The weather was a fitting introduction to what I had come to see inside Nate’s lab—how we might be able to tap the sun’s tremendous energy to make fuels to power cars, trucks, ships, and airplanes.

Stepping into the lab cluttered with computer screens, jars of chemicals, beakers, and other equipment, Nate handed me a pair of safety goggles and offered some advice for what I was about to see. “Everything we do is simple in the end, even though there’s lots of complicated stuff,” he said.

What’s simple is the idea behind all of his team’s research: The sun is the most reliable, plentiful source of renewable energy we have. In fact, more energy from the sun hits the Earth in one hour than humans use in an entire year. If we can find cheap and efficient ways to tap just a fraction of its power, we will go a long way toward finding a clean, affordable, and reliable energy source for the future.

We are all familiar with solar panels, which convert sunlight into electricity. As solar panel costs continue to fall, it’s been encouraging to see how they are becoming a growing source of clean energy around the world. Of course, there’s one major challenge of solar power. The sun sets each night and there are cloudy days. That’s why we need to find efficient ways to store the energy from sunlight so it’s available on demand. 

Batteries are one solution. Even better would be a solar fuel. Fuels have a much higher energy density than batteries, making it far easier to use for storage and transportation. For example, one ton of gasoline stores the same amount of energy as 60 tons of batteries. That’s why, barring a major breakthrough in battery technology, it’s hard to imagine flying from Seattle to Tokyo on a plug-in airplane. Solar Twist download

I’ve written before about the need for an energy miracle to halt climate change and provide access to electricity to millions of the poorest families who live without it. Making solar fuel would be one of those miracles. It would solve the energy storage problem for when the sun isn’t shining. And it would provide an easy-to-use power source for our existing transportation infrastructure. We could continue to drive the cars we have now. Instead of running on fossil fuels from the ground, they would be powered by fuel made from sunlight. And because it wouldn’t contribute additional greenhouses gases to the atmosphere, it would be carbon neutral. 

Imagining such a future is tantalizing. Realizing it will require a lot of hard work. No one knows if there’s a practical way to turn sunlight into fuel. Thanks to the U.S. Department of Energy, Nate and a group of other researchers around the U.S. are receiving research support to find out if it is possible.

We live in a time when new discoveries and innovations are so commonplace that it’s easy to take the cutting-edge research I saw at Caltech for granted. But most breakthroughs that improve our lives—from new health interventions to new clean energy ideas—get their start as government-sponsored research like Nate’s. If successful, that research leads to new innovations, that spawn new industries, that create new jobs, that spur economic growth. It’s impossible to overemphasize the importance of government support in this process. Without it, human progress would not come as far as it has.

tenka-growing-plants-082616-picture1Nate and his team are still at the first stage of this process. But they have reason to be optimistic about what lies ahead. After all, turning sunlight into chemical energy is what plants do every day. Through the process of photosynthesis, plants combine sunlight, water, and carbon dioxide to store solar energy in chemical bonds. At Nate’s lab, his team is working with the same ingredients. The difference is that they need to figure out how to do it even better and beat nature at its own game.

“We want to create a solar fuel inspired by what nature does, in the same way that man built aircraft inspired by birds that fly,” Nate said. “But you don’t build an airplane out of feathers. And we’re not going to build an artificial photosynthetic system out of chlorophylls and living systems, because we can do better than that.”

One of Nate’s students showed me how light can be used to split water into oxygen and hydrogen—a critical first step in the path to solar fuels. The next step would involve combining hydrogen with carbon dioxide to make fuels. Using current technologies, however, it is too costly to produce a fuel from sunlight. To make it cheaper, much more research needs to be done to understand the materials and systems that could create a dependable source of solar fuel.hydrogen-earth-150x150

One idea his team is working on is a kind of artificial turf made of plastic cells that could be easily rolled out to capture sunlight to make fuel. Each plastic cell would contain water, light absorbers, and a catalyst. The catalyst helps accelerate the chemical reactions so each cell can produce hydrogen or carbon-based fuels more efficiently. Unfortunately, the best catalysts are among the rarest and most expensive elements, like platinum. A key focus of Nate’s research is finding other catalysts that are not only effective and durable, but also economical.

Nate’s interest in clean energy research started during the oil crisis in the 1970s, when he waited for hours in gas lines with his dad. He says he knew then that he wanted to dedicate his life to energy research. Now, he is helping to train a new generation of scientists to help solve our world’s energy challenge. Seeing the number of young people working in Nate’s lab was inspiring. The pace of innovation for them is now much faster than ever before. “We do experiments now in a day that would once take a year or an entire Ph.D. thesis to do,” Nate said.

Still, I believe we should be doing a lot more. We need thousands of scientists following all paths that might lead us to a clean energy future. That’s why a group of investors and I recently launched Breakthrough Energy Ventures, a fund that will invest more than $1 billion in scientific discoveries that have the potential to deliver cheap and reliable clean energy to the world.

While we won’t be filling up our cars with solar fuels next week or next year, Nate’s team has already made valuable contributions to our understanding of how we might achieve this bold goal. With increased government and private sector support, we will make it possible for them to move ahead with their research at full speed.

This originally appeared on



Image: UCF

Technology I: University of Central Florida

Leaving your phone plugged in for hours could become a thing of the past, thanks to a new type of battery technology that charges in seconds and lasts for over a week.

Watch the Video

While it probably won’t be commercially available for a years, the researchers said it has the potential to be used in phones, wearables and electric vehicles.

“If they were to replace the batteries with these supercapacitors, you could charge your mobile phone in a few seconds and you wouldn’t need to charge it again for over a week,” said Nitin Choudhary, a UCF postdoctoral associate, who conducted much of the research, published in the academic journal ACS Nano.

How does it work?

Unlike conventional batteries, supercapacitors store electricity statically on their surface which means they can charge and deliver energy rapidly. But supercapacitors have a major shortcoming: they need large surface areas in order to hold lots of energy.

To overcome the problem, the researchers developed supercapacitors built with millions of nano-wires and shells made from two-dimensional materials only a few atoms thick, which allows for super-fast charging. Their prototype is only about the size of a fingernail.

“For small electronic devices, our materials are surpassing the conventional ones worldwide in terms of energy density, power density and cyclic stability,” Choudhary said.

Cyclic stability refers to how many times a battery can be charged, drained and recharged before it starts to degrade. For lithium-ion batteries, this is typically fewer than 1,500 times.

Supercapacitors with two-dimensional materials can be recharged a few thousand times. But the researchers say their prototype still works like new even after being recharged 30,000 times.


wearable-textiles-100616-0414_powdes_ti_f1Those that use the new materials could be used in phones, tablets and other electronic devices, as well as electric vehicles. And because they’re flexible, it could mean a significant development for wearables.









Technology II: Rice University

391f84fd-6427-4c06-9fb4-3d3c8a433f41A new company has been formed (with exclusive licensing rights) to exploit and commercialize the Next Generation Super-Capacitors and Batteries. The opportunity is based on Nanoporous-Nickel Flexible Thin-form, Scalable Super Capacitors and Si-Nanowire Battery Technologies, developed by Rice University and Dr. James M. Tour, PhD – named “One of the Fifty (50) most influential scientists in the World today” is the inventor, patent holder and early stage developer. tourportrait2015-300

tenka-flex-med-082616-picture1Identified Key Markets and Commercial Applications 

  • Medical Devices and Wearable Electronics
  • Drone/Marine Batteries and Power Banks
  • Powered Smart Cards and Motor Cycle/ EV Batteries
  • Sensors & Power Units for the iOT (Internet of Things) [Flexible Form, Energy Dense]  


The Coming Power Needs of the iOTiot-picture1

  • The IoT is populated with billions of tiny devices.
  • They’re smart.
  • They’re cheap.
  • They’re mobile.
  • They need to communicate.
  • Their numbers growing at 20%-30%/Year.

The iOT is Hungry for POWER! All this demands supercapacitors that can pack a lot of affordable power in very small volumes …Ten times more than today’s best supercapacitors can provide.




Highly Scalable – Energy Dense – Flexible Form – Rapid Charge

 Problem 1: Current capacitors and batteries being supplied to the relevant markets lack the sustainable power density, discharge and recharge cycle, warranty life combined with a ‘flexible form factor’ to scale and satisfy the identified industry need for commercial viability & performance.

tenka-smartcard-picture1Solution I: (Minimal Value Product) Tenka is currently providing full, functional Super Capacitor prototypes to an initial customer in the Digital Powered Smart Card industry and has received two (2) phased Contingent Purchase Orders during the First Year Operating Cycle for 120,000 Units and 1,200,000 Units respectively.

Solution II: For Drone/ Marine Batteries – Power Banks & Medical Devices

  • Double the current ‘Time Aloft’ (1 hour+)drone1
  • Reduces operating costs
  • Marine batteries – Less weight, longer life, flex form
  • Provides Fast Recharging,  Extended Life Warranty.
  • Full -battery prototypes being developed

Small batteries will be produced first for Powered Digital Smart Cards (In addition to the MVP Super Caps) solving packaging before scaling up drone battery operations. Technical risks are mainly associated with packaging and scaling.

The Operational Plan is to take full advantage of the gained ‘know how’ (Trade Secrets and Processes) of scaling and packaging solutions developed for the Powered Digital Smart Card and the iOT, to facilitate the roll-out of these additional Application Opportunities. Leveraging gained knowledge from operations is projected to significantly increase margins and profitability. We will begin where the Economies of Scale and Entry Point make sense (cents)!


“We are building and Energy Storage Company starting Small & Growing Big!”

Watch the YouTube Video

1 2 3 4 6
Recent Posts