Video Interview with Professor Ted Sargent at the University of Toronto
With global climate change on the rise, finding ways to capture renewable energy sources is becoming more urgent. Today, our energy needs are largely being met by fossil fuels, such as oil and coal, but we are rapidly depleting these natural resources, and damaging our environment by burning them for fuel. One sustainable alternative is solar energy. Prof. Ted Sargent, an electrical engineer at the University of Toronto, is working on making a new paint-based solar cell that would be low-cost, lightweight, portable, and efficient, bringing sustainable electricity anywhere that it is needed.
“We picture a world in which solar cells are so convenient. They are on a carpet that you can roll out onto your roof, or they are on a decal that you can stick on the side of a streetcar or stick on your car, you can stick on your airplane wing. And they can be kind of adhered to any surface. And they can be used to meet the power needs of that automobile or plane or helicopter or home or tent; and they are ubiquitous.“
Unlike fossil fuels, Sargent explains, “the sun is this incredible, vast resource. We get more sun reaching the Earth’s surface everyday than we need to power the world’s energy needs. In fact, in an hour, we get enough to meet our energy needs for a year; it’s that abundant.” To achieve a better solar cell, Prof. Sargent is working at the interface of chemistry, physics, materials science, and electrical engineering to understand the relationships between light and electrons. He is developing a liquid for solar capture that can be applied as a paint, and that can be printed using roll-to-roll processes similar to those used to print newspapers. These paints would absorb sunlight and use it to generate electricity.
Prof. Sargent envisions solar cells that are so minimal that installing one might be as simple as unrolling a sheet onto a rooftop, or applying a decal to a streetcar or phone. “We picture a world in which solar cells are so convenient… They are so little in their consumption of materials that we change the paradigm of solar energy from one that takes planning, major capital investment, to one where it’s all over the place because it’s so compelling and convenient,” says Sargent.
How do you envision the future of energy and power? Let us know in the comments.
17 Jul 2015
Ted Sargent at the University of Toronto has built a reputation over the years as being a prominent advocate for the use of quantum dots in photovoltaics. Sargent has even penned a piece for IEEE Spectrum covering the topic, and this blog has covered his record breaking efforts at boosting the conversion efficiency of quantum dot-based photovoltaics a few times.
Earlier this year, however, Sargent started to take an interest in the hot material that has the photovoltaics community buzzing: perovskite. Now, he and his research team at the University of Toronto have combined perovskite and quantum dots into a hybrid that they believe could transform LED technology.
In research published in the journal Nature, Sargent’s team describes how they developed a way to embed the quantum dots in the perovskite so that electrons are funneled into the quantum dots, which then convert electricity into light.
Enabling researchers to take their ideas from the earliest research stages right through to the development and commercialization of a final product is a foundation goal at King Abdullah University of Science and Technology (KAUST). One route is for KAUST to provide active support to startup companies that have strong connections with the university’s research activities.
Nicola Bettio, manager of the funding scheme, says seed funding and early-stage capital are made available to startup companies through the KAUST Innovation Fund. “We invest in companies launched by our faculty, researchers and students, alongside international startups that are willing to move their operations to KAUST and Saudi Arabia,” Bettio explains. “By encouraging the transition of science into innovation and new ventures we can help to establish a fertile ecosystem for early-stage technology-based companies in Saudi Arabia.”
Efficient and cost-effective solar power generation will bring significant economic benefits and drastically reduce the carbon footprint of Saudi Arabia and the rest of the world. For the past several years, KAUST has been supporting research into new technologies using ‘colloidal quantum dots’ – a potential alternative to the established design of solar cells.
With an ideal design for solar panels the paint made from quantum dots is highly flexible.
© 2015 KAUST
Colloidal quantum dots are tiny semiconductor particles with the capacity to harvest energy from both the visible spectrum and the previously-untapped near-infrared portion of the sun’s light. Edward Sargent, a senior researcher at the University of Toronto, has been working on the development and application of colloidal quantum dots for the past ten years, and helped found QD Solar, a Canadian startup company aiming to commercialize the new technology.
“When KAUST was founded back in 2009, there was a very strong emphasis on advancing solar technology that led to the creation of KAUST’s Solar and Photovoltaics Engineering Research Center (SPERC),” explains Sargent. “The university employed top professors in the field who have been a key asset during the development of the new quantum dot technique I have been working on. I was fortunate enough to be awarded a KAUST Investigators grant around that time, enabling me to pursue my research in collaboration with these top scientists.”
In 2009, Sargent’s team at the University of Toronto received a grant from KAUST to advance their research into colloidal quantum dots specifically for solar power applications. Since then, the team’s advances have evolved in leaps and bounds. “Our latest design incorporates the dots into a solution, or ‘paint’, which can be applied to flexible surfaces very easily and cheaply,” Sargent explains. “We have also vastly improved the power conversion efficiency of the dots over the past six years, thanks in part to the funding from KAUST.”
Sargent and his team, in collaboration with KAUST researchers, are now investigating ways of combining the dots with existing silicon-based solar cells to create new hybrid structure solar panels. This will allow them to harness a far greater fraction of the sun’s energy than ever before, improving the panels’ efficiency and capacity to generate more power.
Marc Vermeersch, the SPERC managing director, points out that current solar cell technologies are reaching their physical limits. He explains that a key advantage of creating QD Solar’s hybrid system is that existing solar panel producers will be able to modify their manufacturing practices relatively easily to incorporate the new design, rather than starting from scratch. Manufacturers will be able to achieve significant economic and efficiency improvements using QD Solar’s quantum dot-based solar products, Bettio adds.
KAUST anticipates welcoming a QD Solar presence to Saudi Arabia in the near future, as Bettio explains: “QD Solar is working with the KAUST Innovation Fund to raise capital to establish a significant development facility in our Research & Technology Park. Ultimately, this may lead to the establishment of a Saudi player in the photovoltaic industry and the creation of a hybrid solar panel manufacturing facility in the Kingdom.”